ShieldPatch™ X1
Advanced brush grade poly repair kit
ShieldPatch X1 is a general-purpose two-part polymer resin for hand applied repairs which require a quick and efficient coating solution. Developed for use in rectifying corrosion related issues with steel substrates such a steel power poles, pipe spools and wet processing plant equipment. X1 is also suited for repairs to a wide range of applications including rubber, urethanes, steel, and concrete. In addition, X1 also has strong dielectric properties suitable for electrical insulation applications.
It is supplied in handy single-use, pre-measured blister packs of 350mL but we can do larger volumes and sprayable versions.
Technical/Performance Data
| Hardness, ASTM D-2240 | 65 Shore D |
| Mix Ratio by Volume | 100A:28B |
| Gel/Set Time | ~15 min @30°C ambient |
| Tack-free Time | ~45 min (temperature dependant) |
| Maximum Recoat Window | 24 Hours |
| Taber Abrasion Resistance; C-17,1000cycles, 1kg |
75 mg |
| Tensile Strength ASTM412-C | 14 MPa |
| Elongation, ASTM412-C | 65-70% |
| Tear, ASTM 624-86 | 55 kN/m |
| Service Temperature | -40°C to 90°C |
| Volume resistivity | 8×1014 Ohm.cm |
| Dielectric Strength | >20 kV/mm |
Fast & Efficient Repairs
Quick, hand-applied solution for corrosion-related damage.
Download links:
Multi-Surface Application
Adheres to rubber, urethane, steel, and concrete.
Electrical Insulation Strength
Strong dielectric properties for safe electrical insulation.