ShieldPatch™ X2
Advanced hand applied conveyor & rubber repair kit
ShieldPatch X2 is a fast and efficient solution for high abrasion, cut and impact situation repairs, our two-part polymer resin is specifically designed for conveyor belt repairs. Developed for use primarily on conveyor belts, it can also be used for repairs on concrete surfaces, rubber linings, and polyurea coatings. ShieldPatch X2 versatile formula ensures quick and hassle-free repairs.
X2 Suggested conveyor repair solutions: holes, rips, tears, gouges, worn patches, splice damage, edge damage, clip cover protection.
It is supplied in handy single-use, pre-measured blister packs of 350mL but we can manufacture larger volumes and sprayable versions on request.
Technical/Performance Data
| Hardness, ASTM D-2240 | 80 – 90 Shore A |
| Mix Ratio by Volume | 100A:28B |
| Gel/Set Time | ~15 min @30°C ambient |
| Tack-free Time | ~45 min (temperature dependant) |
| Maximum Recoat Window | 24 Hours |
| Taber Abrasion Resistance; C-17,1000cycles, 1kg |
75 mg |
| Tensile Strength ASTM412-C | 10-15 MPa |
| Elongation, ASTM412-C | 450-600% |
| Tear, ASTM 624-86 | 30-40kN/m |
| Service Temperature | -40°C to 90°C |
Fast & Efficient Repairs
Quick, hand-applied solution for corrosion-related damage.
Download links:
Multi-Surface Application
Adheres to rubber, urethane, steel, and concrete.
Electrical Insulation Strength
Strong dielectric properties for safe electrical insulation.